CTD-Chain for two-dimensional measurements in the ocean
The Towed CTD-Chain makes it possible to accurately analyse the water layering and distribution in the upper levels of the ocean.
The towed system with up to 255 CTD-fins is deployed from a ship equipped with an oceanographic winch. The CTD-fins are mounted on an insulated steel cable which is used for inductive data transfer. At the lower end of the tow-cable a depressor insures proper chain deployment at speeds of up to eight knots.
CTD-fins with integrated sensors and electronics:
The CTD-fins are inductively coupled to the tow-cable which ensures the fins’ power supply and enables communication with the deck unit. This design avoids cable-bunches. Underwater-connectors or pressure resistant housings are not needed.
Each fin consists of a 16-bit resolution microprocessor controlled probe with conductivity, temperature and pressure sensors. The sensors are moulded into the fins. A complete data conversion for the parameters requires approx. 15 ms.
Schematic of a CTD-fin
CTD-fin with clamp
For towing speeds above 3 knots, fairings are installed to reduce drag and prevent vibration of the cable.
CTD-chain without fairings winded on a cable drum before deployment
A surface float is towed some 50 m behind the vessel to provide enough buoyancy to decouple the attached chain from the heavy motion.
A deck unit provides the current supply for the CTD-fins, enables bi-directional communication and data acquisition. It interfaces with a PC running a software package.
Data communication between Deck Unit and CTD-fins:
On-screen example of a two-dimensional profile measured by NURC (Saclant Centre in La Spezia, Italy) with a CTD-Chain equipped with 50 CTD-fins in the Strait of Messina.